Easy Pull Starter for 50cc Pocket Quads and Pocket Bikes (New Type)




Easy Pull Starter for 50cc Pocket Quads and Pocket Bikes
Replacement Easy Pull manual starter for compatible 50cc two-stroke petrol engines. The assisted starting mechanism reduces the effort required to start the engine with a smooth, controlled pull.
Compatibility
Suitable for pocket quads and pocket bikes with a matching Easy Pull starter system. Before ordering, compare the mounting hole spacing, housing dimensions and engagement mechanism with your original starter.
Correct Starting Procedure
- Cold engine: Set the carburettor choke to START / CHOKE. After starting, gradually move it to RUN / OPEN as the engine warms up.
- Warm engine: Normally leave the choke in the RUN / OPEN position. Follow the markings on your carburettor and your vehicle’s manual.
- Pull the starter handle gently until the mechanism engages, then continue with a smooth, controlled movement towards your chest.
- Keep hold of the handle and guide it back gently. Do not let it snap back or pull the cord to its full limit.
Important Warning
Do not jerk, yank or pull the starter with excessive force. Never use a sharp pulling action as you would with a brush cutter. If the starter jams or becomes unusually difficult to pull, stop and check the cause instead of forcing it. Never operate the starter while the engine is running.
Mechanical damage caused by forceful pulling, jerking or improper use is not covered by the warranty.
